Search For:

 
 

PRODUCT CATEGORIES


QUICK LINKS

:: Installation ToolsDrill Bits and Hole Saws

Drill Bits and Hole Saws:

Tired of drilling wood doors with hole saws designed for drilling steel?  Tired of backing the hole saw out and cleaning the teeth?  Then try our HIT-48 series hole saws designed to drill wood.  The three carbide teeth will not gum or load up and are clean cutting.  Hole saws can be used on your existing commercial type mandrel if the 1/4" diameter pilot bit is changed out to a longer one, see our part # HIT-48-300 or just use with our mandrel.
THESE HOLE SAWS ARE FOR WOOD ONLY!  NOT FOR USE ON STEEL.



HIT-38MB1
(MORTISE BITS FOR HIT-38, 1")

Mortise Bit for HIT-38 / 1" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job.

(read more...)
  

HIT-38MB2
(MORTISE BIT FOR HIT-38, 7/8" )

Mortise Bit for HIT-38, 7/8" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job.

(read more...)
  

HIT-38MB3
(MORTISE BIT FOR HIT-38, 3/4" )

Mortise Bit for HIT-38 / 3/4" Diameter. Our drill bits are specially modified for mortising use. Don't get stuck on the job without them. Always carry spare bits whenever you're on the job.

(read more...)
  

HIT-44B10
(7/8" MULTI-SPUR BIT)

7/8" Multi spur bit with quick release hex drive 7-1/2" OAL. 
For Use On Wood Doors And Jambs Only.


(read more...)
  

HIT-44B11
(7/8" BRAD POINT BIT)

7/8" brad point bit with quick release hex drive 8" OAL twist lenght 6". 
For Use On Wood Doors And Jambs Only.


(read more...)
  

HIT-44B14
(1" MULTI-SPUR BIT)

1" Multi spur bit with quick release hex drive 7-1/2" OAL. 
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-44B15
(1" BRAD POINT BIT)

1" Brad point bit with quick release hex drive 8" OAL twist length 6". 
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-44B17
(2 WING CARBIDE TIP BORING BIT)

Our newest boring bit is a professional quality 1” diameter two wing carbide tipped bit. It was designed for use in our HIT-44 and HIT-50 drill guides and will work in other guides that will...

(read more...)
  

HIT-44B18
(1-1/2" MULTI-SPUR BIT)

1-1/2" Multi spur bit with quick release hex drive 7-1/2" OAL. 
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-44B19
(1-1/2" MULTI-SPUR BIT)

1-1/2" Multi spur bit with quick release hex drive & carbide tip 7" OAL.   
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-44B21
(2-1/8" MULTI-SPUR BIT)

2-1/8" Multi spur bit with quick release hex drive 7-1/2" OAL. 
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-44B22
(2-1/8" MULTI-SPUR BIT)

2-1/8" Multi spur bit with quick release hex drive & carbide tip 7" OAL. 
For Use On Wood Doors and Jambs Only.


(read more...)
  

HIT-50B1
(1" DIAMETER REPLACEMENT BLADE)

1" replacement blade for HIT-50B9 and HIT-50B14.



(read more...)
  

HIT-50B9
(1" DIAMETER SPADE TYPE BIT)

1" diameter spade type bit with overall lenght of 9".  With a 1/2" shaft diameter and 3/8" hex end.  Will work with both HIT-44 and HIT-50 drill guides.



(read more...)
  

HIT-55B14
(1" DIAMETER SPADE TYPE BIT)

1" diameter spade type bit with overall lenght of 14".  With a 1/2" shaft diameter and 3/8" hex end.  Will work with  HIT-44,  HIT-50 and HIT-55 drill guides.



(read more...)
  
 
© 2017 Major Manufacturing, Inc. All Rights Reserved. Powered by HitNet, Inc.